Broadcast; Broadcast Send (Transmitting To Multiple Recipients); Relay Broadcast (Transmitting Documents Through A Relay Station) - Fuji Xerox DocuPrint CM505 da User Manual

Broadcast

This section describes how to set Broadcast Send and Relay Broadcast.

Broadcast Send (Transmitting to Multiple Recipients)............................................................ 205

Relay Broadcast (Transmitting Documents Through a Relay Station).................................... 205

Remote Relay Broadcast (Performing Relay Broadcast to Remote Locations)....................... 209
Broadcast Send (Transmitting to Multiple Recipients)
The Broadcast Send feature allows you to transmit the same document to multiple
recipients in a single operation. There is no need to repeat the same operation for each
recipient.
If you specify Broadcast Send, the machine prints a Broadcast/Multi-Poll Report after
the Broadcast Send operation finishes.
Note • You can use Broadcast Send by specifying recipients from Fax and Internet Fax for a single
• The maximum number of recipients that you can specify at one time is as follows: Using the
• When using Broadcast Send, the Cover Page and Remote Folder features are not available
• [Confirmation Options] is not available. Check a Broadcast/Multi-Poll Report to see
1
Select the first recipient
Note • When you specify recipients from Fax and
2
Select [+ Add].
3
Select the next recipient.
4
Repeat steps 2 and 3.
5
Press the <Start> button.
6
Select [Yes] on the confirmation screen to start transmission.
Relay Broadcast (Transmitting Documents Through a Relay Station)
The Relay Broadcast feature transmits documents to multiple recipients via other fax
machines (relay stations). When a document is to be transmitted over a long distance
to multiple recipients, it is first transmitted to one relay station and from there to multiple
recipients. When you transmit documents over a long distance to many recipients,
using Relay Broadcast can save on transmission cost.
Furthermore, multiple Relay Broadcast operations can be performed simultaneously.
This is called Multiple Relay Broadcast.
The following three methods are available for Relay Broadcast:
job. (Mix Broadcast)
numeric keypad: 200 locations; using address numbers: 600 locations; and using the
numeric keypad in combination with address numbers: 600 locations.
even if they are enabled on the control panel. If you want to use [Cover Page] and [Remote
Folder], set them when registering each recipient in an address number.
transmission results.
Internet Fax for a single job (Mix
Broadcast), select the fax type for each
recipient from the drop-down menu.

Broadcast

4
205