Transparency Options (Inserting Blank Sheets Between Transparencies) - Fuji Xerox DocuPrint CM505 da User Manual

3 Copy

Transparency Options (Inserting Blank Sheets between Transparencies)

This feature allows you to insert blank separators between output transparency sheets.
At the same time, you can make copies for handouts.
Important • Using transparency sheets for color (with white border) may cause a malfunction or paper
Note
1
Select [Transparency Options].
3 2
Select any option.
Off
Does not insert separators.
Blank Transparency Separators
Inserts a separator each time a transparency is copied. Only one set of copies can be
made.
Blank Separators & Handouts
Inserts a separator each time a transparency is copied. At the same time, the required
number of copies is made for handouts.
Transparency Set & Handouts
Makes copies on transparencies. At the same time, the required number of copies is
made for handouts.
Transparency Tray
Allows you to select the paper tray to be used for the transparencies.
Select [More] to display the [Paper Supply - Transparency] screen on which you can
select a tray.
Note
When [Tray 5] is selected, the [Tray 5] screen is displayed. For more information, refer to "[Tray 5]
Screen" (P.79).
Separator Tray
Allows you to select the paper tray to be used for the separators.
116
jam.
• When loading A4 size transparencies on Tray 5 (Bypass), we recommend that you load
them in portrait orientation.
• Load transparency sheets in a tray in the same orientation as the paper to be used for
handouts and separators.
• When you use the bypass tray, select [Tray 5] on the [Transparency Tray] screen.