Fuji Xerox DocuPrint CM505 da User Manual page 204

4 Fax
2
Select any option.
Manual Receive/Manual Send
Use the drop-down menu to switch between [Manual Receive] and [Manual Send].
Manual Send
Manual Receive
Entering a destination
Use alphanumeric characters to specify a destination.
Note
4
More Characters
Select this button to display a symbol screen, allowing you to use symbols to specify a
destination.
Line Cut
Cuts the line connected.
204
: Allows you to check if connection is established before
sending a fax.
: Allows you to receive a fax manually, such as Facsimile
Information Services.
• Some touch-tone services may not be available even if you set your telephone to send
tones.
• When the line type is set to a tone line, [:] (Tone) is not displayed on the screen. If you want
to send tones (or to use the touch-tone services) while using a pulse line, select [:] (Tone).