Fuji Xerox DocuPrint CM505 da User Manual page 124

3 Copy
Pages per Side - New Page
When [Pages per Side] is set, even if all documents are divided for every chapter
before all of them are assembled in the Pages per Side feature, the next stack of
document is copied from Side 2 of the paper.
[Segment Separators] Screen
This screen allows you to insert a sheet of paper as a separator in between each stack
of documents. You can specify the number of separators to insert in the range from 1
to 99 as necessary.
Note
1
Select any option.
3
2
Select any option.
No Separators
Does not insert any separators.
Blank Separators
Inserts blank separators.
If you select this option, load documents, and press the <Start> button, the blank
separators are inserted ahead of the copies of the documents.
1 Sided Side 1 Only
A first page of the loaded documents is copied on the front side of a separator, and the
rest of pages are copied on the paper other than a separator.
When [Pages per Side] is set, the number of pages (2 pages, 4 pages, or 8 pages) that
you selected to copy onto one side of a single sheet, starting from the first page of the
loaded documents, are copied onto the front page of a separator.
When you load a single sheet document, the document is copied onto a separator.
1 Sided Side 2 Only
A first page of the loaded documents is copied on the back side of a separator, and the
rest of pages are copied on the paper other than a separator.
When [Pages per Side] is set, the number of pages (2 pages, 4 pages, 8 pages) that
you selected to copy onto one side of a single sheet, starting from the first page of the
loaded documents, are copied onto the back side of a separator.
When you load a single sheet document, the document is copied onto a separator.
2 Sided Separators
First two pages of the loaded documents are copied onto each side of a separator, and
the rest of pages starting from the third page are copied onto the paper other than a
separator.
124
• You can specify different settings for each stack of documents. If you do not specify
particular settings for each stack of documents, the previously specified settings are applied.