Document Feeder - Konica Minolta 7045 Instruction Manual

Copying Mixed Size Originals (Mixed Original) (continued)
3
Touch
Original Screen.
4
Touch
The Application Selection Screen will be restored.
5
Touch
Selection Screen.
The Basic Screen will be restored.
6
Enter the desired print quantity from
the control panel keypad.
7
Position mixed originals FACE UP in the

document feeder.

8
Press
START
CAUTION
When the finisher / paper exit tray capacity is
exceeded due to the print quantity selected, re-
move the copied sets as they exit; otherwise,
mishandled paper will occur.
8-26
Mixed Original
on the Special
OK
.
OK
on the Application
.
• APS mode is automatically
selected to copy each origi-
nal size to a matching paper
size in 1:1 mode. Change
magnification manually, if
desired.
• To select AMS, touch the
tray key on the Basic Screen
to select the desired paper
size.
HINTS
See p. 3-6 for details on set-
ting print quantity.
HINTS
• For details on positioning
originals, see p. 3-3.
• Use RADF store mode (p. 3-
20 to p. 3-21) when the origi-
nal count exceeds 50.