Erasing Outside Of The Original (Non-Image Area Erase) - Konica Minolta 7045 Instruction Manual

Erasing Outside of the Original (Non-Image Area Erase)

The Non-image area erase mode is used to copy non standard or special originals,
such as books, magazines, paste-ups, graphs, thick or thin materials, etc. from the
platen glass. The exposed glass area outside the borders of the original will not be
copied.
Specifications for Non-Image Area Erase
❒ Use the platen glass only. Keep RADF open throughout the procedure.
❒ Incompatible Conditions: Using RADF, 2s2, 2s1, APS, AMS, Sort, Staple, Group,
Sheet/Cover Insertion, Chapter, Combination, Booklet, Image Insert, Mixed Original,
Folded Original, Non-Standard Size, Flip Side 2, Reverse Image, Image Shift, STAMP/
OVERLAY
1
Press
APPLICATION
Non Image
2
Touch
Area Erase
Selection Screen.
The incompatible function keys will be dimmed to
show inactivity.
8-50
Set original
on the control panel .
on the Application
General copying
Non-Image Area Erase
Please Be Reminded! Please Be Reminded!
When starting a new copying
job, be sure to close the RADF
securely, then press .
AUTO RESET