Setting Output Mode (Output Mode Screen) - Konica Minolta 7045 Instruction Manual

Advanced Touch Screens (continued)
I Setting Output Mode (Output Mode Screen)
The Output Mode Screen displays when
The following settings are available on the Output Mode Screen.
For the machine with finisher installed:
• Selecting the exit tray (p. 3-29)
• Selecting the output mode (p. 3-30)
• Selecting the staple position (p. 3-30)
• Activating/Deactivating the Rotation function (p. 7-9)
Exit tray key:
Touch to select the
desired exit tray.
STAPLE SET key:
Touch to display the
screen for selecting
staple position in
STAPLE mode.
For the machine without finisher:
• Selecting the output mode (p. 3-27)
• Activating/Deactivating the Rotation function (p. 7-9)
AUTO key:
Touch to activate/
deactivate the
ROTATION function.
OUTPUT
AUTO key:
Touch to activate/deactivate
the ROTATION function.
CANCEL key:
Touch to cancel the selection made on this
screen.
is pressed on the control panel.
Touch SORT/ GROUP/
STAPLE/ FaceUP TRAY1
to select the desired output
mode.
OK key:
Touch to return to the
Basic Screen.
CANCEL key:
Touch to cancel the selection made on this
screen.
Touch E-SORT + Sort/
E-SORT + Group/ GROUP/
FaceUP to select the desired
output mode.
OK key:
Touch to return to the
Basic Screen.
Programmed
Shut Off
Touch
Screens
Rotation
V/H Zoom
7
Advanced
Information
7-5