Dividing an Image into Right and Left Pages (Dual Page)
The Dual Page mode performs image division on the original image. Use Dual Page
to copy an open book or a A3/B4 size sheet onto two A4/B5 sheets in 1s1 or 2s1
mode, or onto the front and back sides of one A4/B5 sheet in 1s2 or 2s2 mode.
The following three modes can be selected from the Dual Page Screen.
• Facing Pages mode: Image division starts from the first scan.
• Front Cover + Facing Pages mode: Image division starts from the second scan,
after the first scan copies normally.
• Front/Back + Facing Pages mode: Image division starts from the third scan, after
the first and second scan copy normally.
Specifications for Dual Page
❒ Store mode is automatically selected.
❒ Paper size: A4, B5, 8.5"x11"
❒ Incompatible Conditions: APS, Sheet/Cover Insertion, Chapter, Combination, Image In-
sert, Mixed Original, Folded Original, Non-standard Size, Flip Side 2, Repeat, Fold Era-
sure, Image Shift, STAMP/OVERLAY
1
Press
APPLICATION
Touch Dual Page on the Application
2
Selection Screen.
Set original
on the control panel .
1s1 / 2s1 mode
1s2 / 2s2 mode
Please Be Reminded!
Please Be Reminded!
When starting a new copying
job, be sure to close the RADF
securely, then press
AUTO RESET
Application
Selection Screen
Sheet/Cover
Insertion
Chapter
Combination
Booklet
OHP
Interleaving
Thin/Thick
Paper
Image Insert
Dual Page
Mixed
Original
Folded
Original
8
Applications
Non-Standard
Size
Flip Side 2
Text/Photo
Enhance
.
Reverse
Image
Repeat
Frame/Fold
Erasure
AUTO
Layout
Image Shift
Non-Image
Area Erase
STAMP/
OVERLAY
8-21