Displays; Cancel=> St/Cl Key - Konica Minolta 7045 Instruction Manual

When "Memory Full" Message Is Displayed (Memory Overflow) (continued)
I When
-Memory full- Start =>START key
1
Wait until the current operation is
completed.
The machine stops copying after producing one
copied set irrespective of the set print quantity.
When scanning in Store mode, however, the
machine stops without producing a copied set.
At this time, all the data still remains in memory.
2
Press
START
The machine will output the scanned data for job
completion in the amount remaining in the print
quantity setting.
3
The following message displays.
If continuous working
check output after copying
All the data in memory will be erased with this
message displayed.
4
Check the original pages, then press
to complete the job.
START
Check pages of the discharged set to confirm the
amount of missing data, then complete the job
according to the print quantity remaining.
Cancel => ST/CL key
to continue copying.

Displays

To suspend the job:
Press
STOP/CLEAR
settings. All scanned data will
be erased.
Or, press
AUTO RESET
job and resume initial settings.
5
to save the job
Trouble-
shooting
Call for
Service
to clear the
Preventive
Maintenance
Clearing
Mishandled
Paper
JAM Key
ADD PAPER
Key
Memory
Overflow
Power OFF/ON
Screen
Copying Hints
5-11