Output - Konica Minolta 7045 Instruction Manual

[2] Copier Initial (continued)

5. Output

Set initial Output mode of the Finisher or exit tray to be effective after power is turned
on or after Auto/Reset occurs.
Default setting for machine with Finisher: EXIT Tray 2; OUTPUT MODE Sort; Automatic Rotation ON
Default setting for machine without Finisher: OUTPUT MODE Non-sort; Automatic Rotation ON
Procedure
1 Touch 2. Copier Initial on the Key Operator Mode Screen to display the Copier Initial
Setting Menu Screen.
2 Touch 5. Output to display the Output Mode Initial Setting Screen.
3 For the machine with Finisher, perform the following operation then proceed to step 5 .
To select the exit tray, touch TRAY1 , TRAY2 or TRAY3 .
NOTE:
If TRAY1 is selected, SORT and STAPLE are automatically dimmed. If TRAY2 or TRAY3 is se-
lected, Face UP TRAY1 is automatically dimmed.
To select the Output mode, touch SORT , GROUP , STAPLE , or Face UP TRAY1 .
NOTES:
1. If STAPLE is selected, SORT is automatically highlighted.
2. If selecting Non-sort mode, do not highlight any key.
To select the desired staple location, touch STAPLE SET . Touch the desired location
on the Staple Location Initial Setting Screen, then touch OK .
You can also select on/off of the Automatic rotation initial setting. To release the
Automatic rotation mode, touch AUTO so that it is no longer highlighted.
4 For the machine without Finisher, perform the following operation.
To select the Output mode, touch E-SORT+Sort , E-SORT+Group , GROUP , or Face UP
You can also select on/off of the Automatic rotation initial setting. To release the
Automatic rotation mode, touch AUTO so that it is no longer highlighted.
5 Touch OK on the Output Mode Initial Setting Screen to complete the setting and
return to the Copier Initial Setting Menu Screen.
6 Touch RETURN to restore the Key Operator Mode Screen.
7 If no further changes are required, touch RETURN to restore the Basic Screen to
perform copying operations.
12-10