Magnification - Konica Minolta 7045 Instruction Manual

[2] Copier Initial (continued)

3. Magnification

Set the magnification ratio you initially want to display after the user turns the power
on or after Auto/Reset restores the Initial settings.
NOTE:
This setting should not conflict with the Initial setting for Paper Tray. For example, if APS is
selected for the initial paper tray setting, a ratio setting other than AMS will be ignored.
Procedure
1 Touch 2. Copier Initial on the Key Operator Mode Screen to display the Copier Initial
Setting Menu Screen.
2 Touch 3. Magnification to display the Magnification Initial Setting Screen. The de-
fault setting is 1.00.
3 Select the desired setting from the Magnification Initial Setting Screen:
To select 1.00 if it is not already displayed, touch 1.00 .
To select another ratio, touch upper/lower arrow key to display the desired ratio, or
enter a 3-digit ratio using the keypad on the control panel.
To select AMS, touch AMS .
4 Touch OK to complete the setting and return to the Copier Initial Setting Menu Screen.
5 Touch RETURN to restore the Key Operator Mode Screen.
6 If no further changes are required, touch RETURN to restore the Basic Screen to
perform copying operations.
12-8