Application Customize; Power Save - Konica Minolta 7045 Instruction Manual

[14] Application Customize

Use this function to rearrange, display, or hide the application keys on the Application
Selection Screen.
Procedure
1 Touch 14. APPLI customize on the Key Operator Mode Screen to display the Appli-
cation Customize Screen.
The application function keys currently set are displayed on the screen.
When setting change is desired, touch EDIT to display the Item Selection Screen.
2 Touch FILE EDIT or IMAGE EDIT , as desired.
3 On the File/Image Edit Customize Screen, touch to highlight the desired application
function key on the right, then touch ADD . Selected key will move to the left part of
the screen, while the key on the right will be dimmed to show inactivity.
4 To cancel the selection you made, touch to highlight the desired key on the left, then
touch DEL . The selected key will disappear.
Touch Pre-set to restore the previous setting.
5 Touch OK to complete the settings, then touch EDIT to return to the Item Selection
Screen.
Touch another item key, if desired, or touch Change buttons to restore the factory
setting.
6 Touch RETURN to restore the Application Customize Screen. Confirm the setting
you made on this screen.
7 Touch OK to restore the Key Operator Mode Screen.
8 If no further changes are required, touch RETURN to restore the Basic Screen to
perform copying operations.
Key Operator
Mode
System Initial
Copier Initial
Preset Key
EKC
Lock Job
Memory
Paper Type
Panel
Contrast
Key Operator
Data
Weekly Timer
Touch Panel
Adjustment

Power Save

Memory
Switch
List Print
Application
Customize
Density Shift
KRDS Host
12
Key Operator
Mode
12-39