Table of Contents
Advertisement
[4] EKC (Electronic Key Counter) (continued)
1. Change EKC Data
Assign an ID No. for an individual or for a group, then create individual password(s)
for each user. You can specify a name and limit count for each password.
EKC ID No.: ID No. from 000~255, designated by key operator.
EKC Password: Unique 5-digit numeric code programmed by key operator for user.
User Name: max. 20 characters
Copy Limit: 0 to 999,999 copies
Procedure
1 Touch 4. E.K.C. on the Key Operator Mode Screen. Enter an 8-digit EKC master key
code, then touch OK to display the EKC Setting Menu Screen.
NOTE:
If an invalid EKC master key code is entered, continue by entering the valid 8-digit code.
2 Touch 1. Change E.K.C. data to display the EKC Data Input Screen.
3 ID No. key is highlighted, enabling you to im-
mediately enter an ID No. Enter a 3-digit ID
No. from 000~255 using the keypad on the
control panel.
4 Touch Password to highlight it.
Enter a 5-digit EKC password using the key-
pad on the control panel.
NOTES:
1. Do not enter "00000". The initial EKC password
value is "00000".
2. We recommend that you make a list of all EKC
passwords and ID Nos.
5 Touch Name to display the Name Input Screen.
If you do not specify the name, proceed to step 8 . This operation can be completed
normally without the name specified.
Key Operator
Mode
System Initial
Copier Initial
Preset Key
EKC
Lock Job
Memory
Paper Type
Panel
Contrast
Key Operator
Data
Weekly Timer
Touch Panel
Adjustment
Power Save
Memory
Switch
List Print
Application
Customize
Density Shift
KRDS Host
12
Key Operator
Mode
12-15
Advertisement
Chapters
Table of Contents
