Power Save; Weekly Timer - Konica Minolta 7045 Instruction Manual

[11] Power Save

Select the interval of time that must elapse before Auto Low Power and Auto Shut Off
become activated. Or, select the Auto Shut Off function to On or Off.
❒ Default settings: Auto low power; 15 min.
Auto shut off; 60 min.
Procedure
1 Touch 11. Power Save on the Key Operator Mode Screen to display the Power Save
Timer Setting Screen.
2 Touch the timer key below the "Auto Low Power" indicator to select a specific waiting
period before activation of the Auto Low Power function. The default setting is 15min.
If the Auto Shut off function is not desired, proceed to step 4 .
If the "Auto Low Power" indicator light is dim and the timer keys cannot be selected,
proceed to step 3 .
NOTES:
• The period of time selected for Auto Low Power cannot exceed the Auto Shut Off setting.
• If the same period of time as Auto Shut Off is selected for Auto Low Power, the Auto Shut Off
will function instead of Auto Low Power.
3 Touch the timer key displayed under the "Auto Shut off" indicator on the Power Save
Timer Setting Screen, to select the period of time to wait before activating Auto Shut
Off. The default setting is 60 min.
NOTE:
If the period of time selected for Auto Shut Off is shorter than the Auto Low Power setting, the
setting for Auto Low Power will be automatically changed to that of the Auto Shut Off setting, and
the Auto Low Power indicator light will dim. In this case, Auto Low Power will not function.
4 Touch NEXT on the Timer Setting Screen to display the Auto Shut Off ON/OFF Set-
ting Screen.
5 Touch ON to activate Auto Shut Off, or touch OFF to de-activate it. The default setting
is the ON setting.
When OFF is selected, Auto Shut Off will not function and the period of time for Auto
Low Power can be selected from 5, 10, 15, 30, 60, 90, 120, and 240min.
6 Touch RETURN to restore the Key Operator Mode Screen.
7 If no further changes are required, touch RETURN to restore the Basic Screen to
perform copying operations.
Key Operator
Mode
System Initial
Copier Initial
Preset Key
EKC
Lock Job
Memory
Paper Type
Panel
Contrast
Key Operator
Data

Weekly Timer

Touch Panel
Adjustment

Power Save

Memory
Switch
List Print
Application
Customize
Density Shift
KRDS Host
12
Key Operator
Mode
12-33