Ekc Data List - Konica Minolta 7045 Instruction Manual

[4] EKC (Electronic Key Counter) (continued)

2. EKC Data List

Use this setting to display the list of copy count and copy limit for each ID No., and to
edit, add, and delete these EKC data.
Procedure
1 Touch 4. E.K.C. on the Key Operator Mode Screen. Enter an 8-digit EKC master key
code, then touch OK to display the EKC Setting Menu Screen.
NOTE:
If an invalid EKC master key code is entered, continue by entering the valid 8-digit code.
2 Touch 2. E.K.C. data list to display the EKC Data List Screen.
3 To delete the EKC data:
(1) Touch Upper or Lower arrow ( / ) key on
the right in the EKC Data List Screen to
highlight the EKC data to be deleted.
(2) Touch DEL. The Delete Confirmation
Screen will be displayed.
(3) Touch Yes to delete, or touch No to cancel.
4 To add the EKC data, touch ADD . The EKC
Data Input Screen with invalid Clear key will
be displayed. To input the EKC data, see p.
12-15 to p. 12-16.
5 To edit the EKC data, touch Upper or Lower
arrow ( / ) key on the right in the EKC Data
List Screen to highlight the EKC data to be
edited, then touch EDIT . The EKC Data Edit
Screen with valid Clear key will be displayed.
(1) To edit the EKC password, touch Pass-
word. Enter a new 5-digit EKC password
using the keypad on the control panel. Do
not enter "00000".
(2) To edit the name, touch Name. For details
on the Name Input Screen, see p. 12-16.
(3) To edit the copy limit, Touch Limit. Enter a
new 6-digit copy limit using the keypad on
the control panel. Entering "000000" sig-
nifies no copy limit.
(4) To clear the copy count, touch Clear.
(5) To complete the settings, touch OK on the EKC Data Edit Screen.
To cancel the settings, touch RETURN .
The EKC Data List Screen will be displayed.
6 Touch RETURN to restore the EKC Setting Menu Screen.
7 Touch RETURN to restore the Key Operator Mode Screen.
8 If no further changes are required, touch RETURN to restore the Basic Screen to
perform copying operations.
Key Operator
Mode
System Initial
Copier Initial
Preset Key
EKC
Lock Job
Memory
Paper Type
Panel
Contrast
Key Operator
Data
Weekly Timer
Touch Panel
Adjustment
Power Save
Memory
Switch
List Print
Application
Customize
Density Shift
KRDS Host
12
Key Operator
Mode
12-17