Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Opticon Manuals
  4. Barcode Reader
  5. OPN2002
  6. User manual

Opticon OPN2002 User Manual

Hide thumbs Also See for OPN2002:

Advertisement

Quick Links

Download this manual
CAUTION: This information is subject to change without prior notice.
Copyright 2010, Opticon Sensors Europe BV, all rights reserved.
This manual may not, in whole or in part, be copied, photocopied, reproduced, translated or converted
to any electronic or machine readable form without prior written consent of Opticon Sensors Europe.
THE GENERAL USE AND FUNCTIONING OF THE BAR CODE SCANNER IS DESCRIBED IN THIS
DOCUMENT. ALSO GENERAL SETUP INSTRUCTIONS TO GET STARTED ARE DESCRIBED IN
THIS DOCUMENT. FOR FURTHER INSTRUCTIONS CONSULT OPTICON OR YOUR LOCAL
DEALER.
OPN2002 & OPN2003 BATCH DEMO MANUAL
(Version RFG35412)
The batch demo application for the OPN2002/3 demonstrates its capabilities to
store barcode data in a file and transmit this file to a remote host. The files are
transferred using the NetO protocol by using USB and/or the CRD2000 multi
cradle.
Since the OPN2002/3 terminals don't have a display to show any instructions
this demo application implements a user interface that consists entirely of using
just the 2 keys to scan barcodes. This brief setup guide describes all features as
well as handling instructions.
More product details, additional support and more configuration options to
customize this application to your own preferences (by using the Universal menu
book) will be updated at
Capabilities of the Batch demo application
The following features are currently supported:
Scans and stores barcodes into a database file on the internal RAM disk.
Transmits the barcode data file to a remote PC or laptop using the NetO
protocol by either USB or the CRD2000 multi cradle.
OSE Universal menu book support to configure all barcode decoders, pre-
and suffixes, read modes and various other options.
Storing of configurations in non-volatile memory to allow all settings to be
restored after a reset.
Configurable output format of the database file
Easy software upgrading by USB (VCP) or the CRD-2000 multi cradle
(RS232) using Appload.
www.opticon.com
1

Advertisement

loading
Need help?

Need help?

Do you have a question about the OPN2002 and is the answer not in the manual?

Questions and answers

Related Manuals for Opticon OPN2002

Summary of Contents for Opticon OPN2002

  • Page 1 This manual may not, in whole or in part, be copied, photocopied, reproduced, translated or converted to any electronic or machine readable form without prior written consent of Opticon Sensors Europe. THE GENERAL USE AND FUNCTIONING OF THE BAR CODE SCANNER IS DESCRIBED IN THIS DOCUMENT.

  • Page 2: System Requirements

    Minimum required NetO32 host application This demo application uses Opticons NetO32 application to be able to transfer files from the OPN2002 or OPN2003 to a remote PC or laptop. This application can be downloaded from our web site. The minimum required NetO32 version is Version 2.07.
  • Page 3 Customizing your OPN2002 and OPN2003 OSE Universal Menu Book support After loading this software on the OPN2002/3 for the first time, the application will automatically be reset to default. If needed, reading the following default label will also reset the application*...
  • Page 4 2,003278,14:41:04,23/11/2009 9780131103627 1,003278,14:41:00,23/11/2009 The OPN2002 automatically sorts the data base file after adding a scanned barcode to the database. This is done to keep the database search functions equally fast when the database is filled with many barcodes.* The file name of the database is 'DATA.TXT', which is stored on the host PC or laptop after the file has been transferred using the NetO protocol.
  • Page 5 Deleting the database file from the internal RAM disk It might be possible that your OPN2002/3 has a full or corrupt RAM disk or contains unwanted barcode data that you want to delete from the OPN2002/3. In this situation it is possible to read the label below to erase all files from the RAM disk.*...
  • Page 6 NetO-protocol. The data is transmitted by either a mini-USB cable or by the CRD2000 multi cradle (OPN2002 only). To be able to receive the files on the host, you'll need NetO32 to be installed. The latest version of NetO32 can be downloaded from our web site under 'Service and support' >...
  • Page 7 Since the OPN2002 doesn't have a system menu in which a terminal ID can be configured, each OPN2002 has its own unique serial number stored in non- volatile memory.
  • Page 8 The 6-digit serial numbers of all your OPN2002s will have to added at 'Tools > Options > Polling and Timing > Terminals to Poll'. Screenshot of Polling and Timing settings with a list of OPN2002 serial numbers When using the CRD200, don't configure a Poll Speed faster than 0,5s because once an OPN2002 is communicating to the host, the other OPN2002s will be temporarily muted for 250ms by the CRD2000 to avoid data collisions.
  • Page 9 RFG* OPN2003 RFF* * It is often possible to load OPN2002 applications on the OPN2003 and vice versa, because the hardware is mostly the same (besides Bluetooth capabilities and cradle contacts that are only present on the OPN2002). USB Driver To be able to communicate with the OPN200x terminals using USB, you will need to have its USB driver installed on your PC.
  • Page 10 Loading software on the OPN2002 To load a new OS or application onto the OPN2002, you'll need a mini-USB cable (which is supplied with the OPN2002) or the CRD2000 cradle. To load an OS or application file, please follow the instructions below.

  • Page 11: Troubleshooting

    Trouble shooting Since the OPN200x doesn't have a display, it also doesn't have a system menu to resort to when you've installed a crashing application that prevents you from loading new software on the OPN200x. For this reason the OPN200x has a few escape mechanisms to allow you to restart, halt your application and/or install new software.

  • Page 12: Appendix A: Database Output Formatting

    Appendix A: Database output formatting The default output format of each record in the database file is: <Barcode (40 chars)>,<Quantity (6 chars)>,<hh:mm:ss>,<dd/mm/yyyy> However, this application allows you to customize this format to make it suitable for your own application. The following aspects of the output format are configurable. Read the configuration barcodes on the following page to select the various options.
  • Page 14 Added configurable database formatting December 14 , 2009 RFG35412 Fixed very slow storing of barcodes February 3 , 2010 Please check our web site at www.opticon.com to see if there are updates available for this application, the Operating System, NetO32 and/or this manual.

This manual is also suitable for:

Opn2003