5
To recall a stored custom zoom ratio
1
Touch [Zoom].
A screen appears, showing the available Zoom settings.
2
Touch [CustomZoom].
3
Touch [Set].
4
Touch [1], [2] or [Minimal].
5
Touch [Enter]. The entered zoom ratio is recalled.
To specify different vertical and horizontal scaling proportions ("X/Y Zoom" setting)
1
Touch [Zoom]. A screen appears, showing the available Zoom settings.
2
Touch [CustomZoom].
3
Touch [X/Y Zoom]. The X/Y Zoom screen appears.
4
Make sure that [X] is selected.
5
Using the keypad, type in the desired length of side X (be-
tween 0.250 and 4.000). The entered zoom ratio is dis-
played.
6
Touch [Y].
7
Using the keypad, type in the desired length of side Y (between 0.250 and 4.000).
The entered zoom ratio is displayed.
8
Touch [Enter].
The entered zoom ratio is displayed.
5-10
5.3 Specifying a Zoom Setting
Konica 8020/8031