2.2 Practical Copy Examples
To copy a postcard
An example for making a single-sided copy from a single-sided postcard onto a postcard loaded into the
manual bypass tray is described below.
Position the postcard document face down onto the platen glass.
When positioning the document, position it so that the top is toward the rear of the
copier.
Touch [OrigÖ Copy].
Touch [Original Direction].
Touch the setting for a document with the top pointing to the right.
Touch [Paper].
Select the manual bypass tray.
Touch [4
The "Thick2" Paper setting is automatically selected.
Prepare one postcard.
Load the postcard into the manual bypass tray with the top of the postcard entering
the feed slot and the side to be printed onto facing down. (The side where the
address is written should face up.)
Konica 8020/8031
6 L].
2
2-9