Konica Minolta 8020 User Manual page 54

3.5 Loading Paper
5
Load the paper into the drawer so that the side of the pa-
per to be printed onto (the side facing up when the pack-
age was unwrapped) faces up.
6
When making manual double-sided copies, load the pa-
per so that the second side (the blank side) faces up.
Note
If the paper is curled, flatten it before loading it.
Do not load so much paper that the top of the stack is higher than the Ä mark.
Do not load more than 21 sheets of special paper.
Before loading envelopes, press them down to make sure that all air is removed, and make sure
that the folds of the flaps are firmly pressed, otherwise the envelopes may become wrinkled or a
paper misfeed may occur.
When loading additional paper, remove any paper remaining in the drawer, place it on top of the
new paper, and then align the paper in the stack well before loading it into the drawer. We
recommend replenishing the paper only after all of the paper in the drawer has been used,
otherwise a paper misfeed may occur.
Tip
When loading 4 6 L paper, load them with the short-
er side as the leading edge, as shown.
Note
Do not load 4 6 L paper crosswise, as shown.
Konica 8020/8031
3
3-9