Output Settings; Zoom Settings - Konica Minolta 8020 User Manual

1.2 Available Features

Output Settings

Stapling
Copies are stapled together before they are output.
Stapling is only available if the optional finisher (FS-135 or FS-231) is installed.
Hole-punching
Holes are punched in copies before they are output.
Hole-punching is only available if the punch kit (PK-131) is installed in the optional finisher
(FS-231).

Zoom Settings

Auto Size
G This setting automatically selects the most appropriate zoom ratio based on the size of the document
loaded and the specified paper size.
Full Size
G This setting makes a copy that is the same size as the document ( 1.000).
Enlarged copies
G Zoom settings for making enlarged copies from common standard document sizes to standard paper
sizes are available.
H Example 1: A Letter-size document can be copied onto the larger 11
H Example 2: A Legal-size document can be copied onto the larger 11
Reduced copies
G Zoom settings for making reduced copies from common standard document sizes to standard paper
sizes are available.
H Example 1: A Legal-size document can be copied onto the smaller Letter-size paper.
H
Example 2: An 11
Minimal
G
This setting slightly reduces the copy ( 0.930).
H
Selecting the "Minimal" setting ensures that any part of the original positioned at the edge of the
page will not be cut off in the copy.
Zoom copies
G Any zoom ratio (between 0.250 and 4.000) can be specified.
H Touch and
"CustomZoom" setting
G Any zoom ratio (between 0.250 and 4.000) can be specified.
H Use the keypad to enter the desired zoom ratio.
H In addition, up to two zoom ratios specified using the keypad can be stored for later use.
"X/Y Zoom" function
G The copy size can be changed by specifying different scaling proportions (between 0.250 and
4.000) for the vertical and the horizontal dimensions.
Konica 8020/8031
17-size document can be copied onto the smaller Letter-size paper.
to specify the desired zoom ratio.
17-size paper.
17-size paper.
1
1-5