To Specify An Original Setting - Konica Minolta 8020 User Manual

5.5 Selecting the Orig > Copy Settings (Original Settings)

To specify an Original setting

1
Touch [OrigÖ Copy].
The OriginalÖ Copy screen appears.
2
Select the setting for the type of document to be copied.
3
If "Book" is selected, a screen showing the available Book
settings appears.
4
Select the desired Book setting, and then touch [Enter].
5
If "Book Erase" is selected, a screen showing
the available Book Erase settings appears.
6
Select the desired Book Erase setting.
7
If the settings for frame-erasing or center- & frame-erasing are selected, touch
specify the width of the area to be erased. The width of the area erased with the center-erasing setting
is not changed by touching
? Were the areas of the book not erased correctly?
§ When a "Book Erase" setting is selected, be sure to touch [Original Size] on the Book Erase screen
and specify the size of the original. If the document size is incorrect, the correct area of the copy
will not be erased.
Konica 8020/8031
and .
5
and to
5-15