5.6 Selecting the Orig > Copy Settings (Copy Settings)
5.6
Selecting the Orig > Copy Settings (Copy Settings)
The type of original and the desired type of copy can be specified. In addition, the document orientation
and the position of the binding margin can also be specified.
The Copy settings are described below. For details about the Original setting and the document orienta-
tion and binding margin position, refer to p. 5-13 and page 5-23.
The following nine Copy settings are available.
G
Single-sided ("1" setting)
G
Double-sided ("2" setting)
G
Single-sided 2 in 1 ("1-2 in 1" setting)
G
Double-sided 2 in 1 ("2-2 in 1" setting)
G
Booklet ("4 in 1/Booklet" setting)
G
Booklet-binding ("Booklet Creation" setting)
G
Center-erasing ("Center Erase" setting)
G
Single-sided 4 in 1 ("1-4 in 1" setting)
G
Double-sided 4 in 1 ("2-4 in 1" setting)
Note
Double-sided, double-sided 2 in 1 and double-sided 4 in 1 copying are only available if the optional
duplex unit is installed.
Booklet-binding and center-erasing are only available if the optional finisher FS-231 is installed.
Konica 8020/8031
5
5-17