Konica Minolta 8020 User Manual page 80

4.2 Feeding the Document
4
For transparent or translucent documents
Place a blank sheet of paper of the same size as the doc-
ument over the document.
5
For bound documents spread over two facing pages, such as a book or magazine
Position the top of the book toward the back of the copier,
as shown.
6
Position the document with the binding aligned with the
Touch [OrigÖ Copy], and then touch [Book]. Select the desired Book setting, and then touch [Enter].
For more details, refer to "Selecting the OrigÖ Copy Settings (Original Setting)" (page 5-13).
Note
Do not place objects exceeding 4-1/2 lbs. on the platen glass. In addition, if a book is placed on
the platen glass, do not press it down extremely hard, otherwise the platen glass may be damaged.
For thick books or large objects, make the copy without closing the platen cover or duplexing doc-
ument feeder. When the document is being scanned without closing the platen cover or duplexing
document feeder, do not look directly at the light that may shine through the platen glass. The light
that shines is bright, and may cause minimal damage to some people's eyesight. However, the
light emitted by the scanner is NOT a laser, and therefore not extremely dangerous.
7
Touch [OrigÖ Copy].
The OriginalÖ Copy screen appears.
Konica 8020/8031
mark on the top document width scale.
4
4-11