4
6
Touch [Original Direction]. The Original
Direction screen appears.
7
Select the setting appropriate for your document, and then touch [Enter].
H
If the orientation of the document is different from that of the selected Original Direction setting,
2 in 1 or 4 in 1 copies will not be printed correctly.
Note
If the Original Direction setting is not selected, documents loaded crosswise will be copied with the
portrait orientation and documents loaded lengthwise will be copied with the landscape orientation.
Loaded crosswise: Portrait orientation
Loaded lengthwise: Landscape orientation
8
If documents printed on thick paper are loaded, touch [Thick Original].
9
Select the desired copy settings, and then press the [START] key.
10
The documents are fed in, starting with the topmost document.
11
After the documents are scanned, they are fed out into the document output tray.
12
When removing large-sized documents, carefully lift up
the document feed tray (of the duplexing document feed-
er) as far as possible.
13
Remove the documents from the document output tray.
4-6
4.2 Feeding the Document
Konica 8020/8031