Making Copies Using Accounts; Using The "Copy Track" Function; To Make Copies When Accounts Are Specified - Konica Minolta 8020 User Manual

2.6 Making Copies Using Accounts

2.6 Making Copies Using Accounts

Using the "Copy Track" Function

The total number of copies allowed and the copies allowed for certain sizes can be set for up to 99 ac-
counts.
G
If the "Copy Track" function is used, printing is only possible by users who enter their assigned access
code.
H Copying cannot be performed by users who do not know the access code.
H For access codes, contact your administrator.
G The access codes are set using the Administrator mode available from the User's Choice screen. Set-
tings should be made by the administrator.
H
Settings cannot be made by anyone who does not log in using the administrator access code.
H For details on the administrator access code, contact the authorized service representative.

To make copies when accounts are specified

1
If an access code has been specified, a
screen appears, indicating that the access
code must be entered.
2
Using the keypad, enter the assigned four-
digit access code.
3
Press the [ACCESS] key. The access code input screen disappears, and the Basic
screen appears.
4
Make copies using the desired Copy mode settings.
5
After you finish making your copies, press the [ACCESS] key.
The access code input screen appears again.
Konica 8020/8031
2
2-15