To Change The Settings - Konica Minolta 8020 User Manual

5.9 Checking the Settings
4
Touch [Next] to display the third screen of settings.
5
To change a setting:
H Touch the setting that you wish to change. The corresponding screen appears.
H Change the setting as desired.
Tip
The corresponding screens for the "Scan to Memory", "Separate Scan", "Copy 1 Set" and "Neg.
Pos. Reverse" functions and the "Glossy Mode" setting are not displayed. Perform the usual pro-
cedure to display the corresponding screens when changing these settings.

To change the settings

1
Press the [CHECK] key.
2
Touch [Next] or [BackUp] until the screen containing the setting that you wish to change appears.
3
Touch the setting that you wish to change. The corresponding screen appears.
4
Change the setting in the same way that it would normally be set.
Konica 8020/8031
5
5-33