Konica Minolta 8020 User Manual page 20

1.3 Names of Control Panel Parts and Their Functions
No. Part Name
12 [START] key
13 [C] (CLEAR QTY.) key
14 Control panel release lever
15 [ENLARGE DISPLAY] key
16 Touch panel contrast-adjusting dial
* Job: Any set of consecutive operations, such as those for making copies, scans or computer printouts
Konica 8020/8031
Description
• Press to start a job.
• If this key is pressed during a continuous copy operation, scanning for the job
begins. (Queued copy) See p. 6-2.
• Press to continue an interrupted copy job.
• If this key is pressed while the copier is warming up, scanning for the job
begins. (Queued copy) See p. 1-16.
• The key indicator lights up in green to indicate that jobs can be queued. The
key indicator lights up in orange to indicate that no jobs can be queued.
• Press to reset the number of copies to "1".
• Press to erase a setting, such as the zoom ratio or size, selected using the
keypad.
• The scanned image is erased.
• Use when adjusting the angle of the control panel.
• Pull the release lever, and then push down on the control panel to adjust its
angle.
• Will be used to enlarge the display. (Currently not available)
• Use to adjust the contrast of the touch panel.
1
1-13