Using the Utility Mode
Exposure Level Priority (Manual)
Set the default value of the exposure level for the Manual exposure mode.
The image becomes lighter toward a smaller number and darker toward a larger
number, with "3" as the central value.
The default value is "3."
G
Output Priority
Choose the finishing function to be selected automatically when power is turned
ON or panel reset from among "Non-Sort," "Sort," or "Group."
The default value is "Non-Sort."
G
Crisscross Mode
Select whether to enable or disable crisscross stacking when the conditions for
crisscross stacking are met.
The default value is "Enabled."
G
4in1 Copy Order
Select the copying order in the 4in1 mode from among the following two patterns:
The default value is "Pattern A."
G
Book Binding Position
Select whether to let the copier scan the left-hand-side page (Left-bound) or the
right-hand-side page (Right-bound) first when it scans an open book.
The default value is "Left-bound."
G
Margin Setting
Choose the width of the file margin to be set in the copy in the range between 0
mm and 20 mm (in 1-mm increments).
The default value is "10 mm."
G
Di152/Di183
Pattern A
Pattern B
7
7-7