Important Maintenance Work To Be Carried Out By An Authorized Ktm Workshop (As Additional Order) - KTM 250 EXC-F EU 2010 Owner's Manual

SERVICE SCHEDULE (SX‑F)

Important maintenance work to be carried out by an authorized KTM workshop (as additional order)

11.2
Conduct a major fork service. (SX‑F)
Conduct a minor fork service. (SX‑F)
Perform a shock absorber service. (SX‑F)
Grease the steering head bearing.
Treat electric contacts with contact spray.
Change the hydraulic clutch fluid.
Change the front brake fluid.
Change the rear brake fluid.
Check the clutch discs for wear.
Check the clutch.
x
Check the cylinder and piston for wear.
Check the camshafts.
x
Check the valve spring seat.
Check the valves.
x
Change the valves.
x
Check wear of valve guides.
Change the valve springs.
x
Check the timing-chain tensioner function.
Check the crankshaft run-out at the bearing pin.
Change the conrod bearing.
Change the crankshaft main bearing.
Fully check the transmission.
Check the shift mechanism.
Check the spring length of the oil pressure regulator valve.
Change the glass fiber yarn filling of the main silencer.
Change the foot brake cylinder seals.
Check/adjust the carburetor components.
S10A: Every 10 service hours - corresponds to about 70 liters of fuel (18.5 US gal) / after every race
S20N: Once after 20 service hours - corresponds to about 140 liters of fuel (37 US gal)
S20A: Every 20 service hours - corresponds to about 140 liters of fuel (37 US gal)
S30A: Every 30 service hours - corresponds to about 210 liters of fuel (55.5 US gal)
S40A: Every 40 service hours - corresponds to about 280 liters of fuel (74 US gal)
S80A: Every 80 service hours - corresponds to about 560 liters of fuel (148 US gal)
J1A: annually
x
x
x
x
( p. 83)
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
S10A S20N
•
•
x
•
S20A S30A S40A S80A
•
• • •
•
• •
• •
•
•
•
•
•
•
•
•
•
•
•
• • •
• •
•
38
J1A
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
• •