Removing Front Wheel - KTM 250 EXC-F EU 2010 Owner's Manual

MAINTENANCE WORK ON CHASSIS AND ENGINE

Removing front wheel

x
13.66
–
Remove locking split pins
–
Clean the brake caliper and brake caliper support.
100808-10
–
Check that leaf spring
caliper support are seated correctly.
100407-10
–
Fit the brake linings, insert the bolt, and mount the locking split pins.
–
Operate the foot brake lever repeatedly until the brake linings lie on the brake disc
and there is a pressure point.
100408-01
–
Correct the brake fluid quantity to marking
Brake fluid DOT 4 / DOT 5.1 (
–
Mount screw cap
Info
Clean up overflowed or spilt brake fluid immediately with water.
400233-10
–
Jack up the motorcycle. (
–
Press the brake caliper by hand on to the brake disc in order to press back the
brake pistons.
Info
Make sure when pushing back the brake pistons that you do not press the
brake caliper against the spokes.
100809-01
–
Remove screw
–
Loosen screw
500084-10
, withdraw bolt

in the brake caliper and sliding plate

p. 116)
with membrane and the O-ring.
 
p. 40)
.

.

, and take out the brake linings.

in the brake

.

69