Controls (Exc-F, Exc-F Six Days, Xcf-W); Speedometer; Speedometer Activation And Test; Tripmaster Switch - KTM 250 EXC-F EU 2010 Owner's Manual

CONTROLS (EXC‑F, EXC‑F SIX DAYS, XCF-W)

Speedometer

6.1

Speedometer activation and test

6.2

Tripmaster switch

6.3
(Option: Tripmaster switch)
You can use the trip master switch to control the functions of the speedometer from the handlebar.
Info
The trip master is an optional accessory.

Setting kilometers or miles

6.4
Info
If you change the unit of measure, the ODO value is retained and converted accordingly.
The values TR1, TR2, A1, A2 and S1 are cleared when the unit of measure is changed.
–
Press the key
–
Press the button
–
Press the button
Info
In its condition at delivery, the display mode SPEED/H andSPEED/ODO is acti-
vated.
400312-01
Activating the speedometer:
The speedometer is activated when one of the keys is pressed or a signal is received
from the wheel speed sensor.
Display test
For the function test of the display, all display segments light up briefly.
400313-01
WS (wheel size)
After the display function test, the wheel size WS is displayed briefly.
Info
2205 mm corresponds to the size of the 21" front wheel with a series produc-
tion tire.
The display then changes to the last selected mode.
400314-01
Condition
The motorcycle is stationary.
–
Press the button
display.
–
Press the button
The Setup menu opens and the active functions are displayed.
–
Press the button
Adjusting Km/h
–
Press the button
Adjusting Mph
–
Press the button
400329-01
to change the display mode or change to one of the setup menus.
to control different functions.
to control different functions.
briefly and repeatedly until H appears at the bottom right of the
for 3 - 5 seconds.
repeatedly until the Km/h/Mph display flashes.
.
.
15