MAINTENANCE WORK ON CHASSIS AND ENGINE
Installing the front fender
13.31
Removing headlight mask with headlight (EXC‑F, EXC‑F SIX DAYS, XCF-W)
13.32
Refitting the headlight mask with the headlight (EXC‑F, EXC‑F SIX DAYS, XCF-W)
13.33
–
Ensure that the spacers are mounted in the fender.
–
Position the front fender. Mount and tighten screws
Guideline
Remaining screws, chassis
Info
Make sure the holding lugs engage in the start number plate or headlight
mask.
600692-10
–
Switch off all electrical equipment.
–
Remove screw
–
Loosen the rubber band
600703-10
–
Pull out the electric plug connector
headlight.
600702-10
–
Connect the electric plug connector
600702-11
–
Position the headlight mask and fix it with the rubber band
Info
Ensure that the retaining lugs engage in the fender.
–
Position the brake line and wiring harness. Put the clamp on, mount and tighten
screw
.
–
Check the headlight adjustment. (
600703-11
M6
and take off clamp.
. Push up the headlight mask and swing it forwards.
and remove the headlight mask with the
.
p. 76)
.
10 Nm (7.4 lbf ft)
.
53