Important Maintenance Work To Be Carried Out By An Authorized Ktm Workshop (As Additional Order) - KTM 250 XCF-W USA 2010 Owner's Manual

SERVICE SCHEDULE

Important maintenance work to be carried out by an authorized KTM workshop (as additional order).

10.2
Perform a fork service. x
Perform a shock absorber service.
Grease the steering head bearing.
( p. 46)
Treat electric contacts with contact
spray.
Change the hydraulic clutch fluid.
( p. 55)
Change the front brake fluid.
Change the rear brake fluid.
Clean the spark arrestor.
x
(250 XCF‑W USA)
Check the clutch discs for wear.
Check the clutch. x
Check the cylinder and piston for
wear. x
Check the camshafts.
x
Check the valve spring seat.
Check the valves.
x
Change the valves.
x
Check wear of valve guides.
Change the valve springs.
x
Check the timing-chain tensioner
function.
x
Check the crankshaft run-out at the
bearing pin.
x
Change the conrod bearing.
Change the crankshaft main bear-
ing.
x
Fully check the transmission.
Check the shift mechanism.
Check the spring length of the oil pres-
sure regulator valve.
x
Change the glass fiber yarn filling of
the main silencer.
x
Change the foot brake cylinder
seals.
x
Check/adjust the carburetor compo-
nents.
x
S10A: every 10 service hours
S20A: every 20 service hours / after every race
S40A: every 40 service hours
S80A: every 80 service hours
S20A: every 20 service hours / after every race
S40A: every 40 service hours
S80A: every 80 service hours
S20N: once after 20 operating hours
S40A: every 40 service hours
J1A: annually
Competition use
S10A S20A
x
x
x
x
x
•
x
•
x
x
x
x
x
• •
•
Hobby use
S40A S80A S20A S40A
• •
• •
• •
• •
• •
• •
• •
•
•
• •
• •
• •
• •
•
• •
• •
• •
• • •
• •
• •
S20N S40A
S80A
• •
•
• •
• •
•
•
•
•
•
•
•
•
•
•
•
•
•
•
• •
• •
• •
31
J1A
•
•
•
•
•
•
•