MAINTENANCE WORK ON CHASSIS AND ENGINE
Checking steering head bearing play
13.23
Warning
Danger of accidents Unstable vehicle handling from incorrect steering head bearing play.
–
Adjust the steering head bearing play without delay. (Your authorized KTM workshop will be glad to help.)
Info
If the bike is driven for a longer time with play in the steering head bearing, the bearing and the bearing seats in the frame can
be damaged after time.
Adjusting play of steering head bearing
13.24
–
Jack up the motorcycle. (
–
Move the handlebar to the straight-ahead position. Move the fork legs to and fro in
the direction of travel.
No play should be noticeable in the steering head bearing.
»
If there is noticeable play present:
(SX‑F, 250 EXC-F SIX DAYS EU)
–
Adjust the play of the steering head bearing.
(EXC‑F EU, EXC‑F AUS, XCF‑W ZA)
–
Adjust play of the steering head bearing.
400387-10
–
Move the handlebar to and fro over the entire steering range.
The handlebar must be able to move easily over the entire steering range. No
resting locations should be noticeable.
»
If click positions are noticeable:
(SX‑F, 250 EXC-F SIX DAYS EU)
–
Adjust the play of the steering head bearing.
(EXC‑F EU, EXC‑F AUS, XCF‑W ZA)
–
Adjust play of the steering head bearing.
–
Check the steering head bearing and replace if required.
–
Remove the motorcycle from the work stand. (
(EXC‑F EU, EXC‑F AUS, XCF‑W ZA)
x
–
Jack up the motorcycle. (
–
Loosen screws
–
Loosen and retighten screw
Guideline
Screw, top steering head
–
Using a plastic hammer, tap lightly on the upper triple clamp to avoid strains.
–
Fully tighten screw
Guideline
Screw, top triple clamp
100022-10
–
Tighten screw
Guideline
Screw, top steering stem
–
Check the steering head bearing play. (
p. 40)
p. 40)
and
.
.
M20x1.5
.
M8
.
M8
p. 49)
(
p. 50)
x
(
p. 49)
x
(
p. 50)
x
(
p. 49)
x
p. 40)
10 Nm (7.4 lbf ft)
20 Nm
(14.8 lbf ft)
20 Nm
(14.8 lbf ft)
49