MAINTENANCE WORK ON CHASSIS AND ENGINE
Installing the fork legs
x
13.27
(250 EXC-F SIX DAYS EU)
–
Loosen screws
–
Loosen screws
100803-10
(SX‑F)
–
Loosen screws
–
Loosen screws
600877-10
–
Position the fork legs.
Info
The topmost sunk nut in the fork leg must be flush to the upper edge of the
upper triple clamp.
Position bleeder screws
100021-10
(EXC‑F EU, EXC‑F AUS, XCF‑W ZA)
–
Fully tighten screws
Guideline
Screw, top triple clamp
–
Fully tighten screws
Guideline
Screw, bottom triple clamp
100804-11
(250 EXC-F SIX DAYS EU)
–
Fully tighten screws
Guideline
Screw, top triple clamp
–
Fully tighten screws
Guideline
Screw, bottom triple clamp
100803-11
(SX‑F)
–
Fully tighten screws
Guideline
Screw, top triple clamp
–
Fully tighten screws
600877-11
. Remove the fork leg on the left.
. Remove the fork leg on the right.
. Remove the fork leg on the left.
. Remove the fork leg on the right.
toward the front.
.
M8
.
M8
.
M8
.
M8
.
M8
.
51
20 Nm
(14.8 lbf ft)
15 Nm
(11.1 lbf ft)
17 Nm
(12.5 lbf ft)
12 Nm
(8.9 lbf ft)
17 Nm
(12.5 lbf ft)