MAINTENANCE WORK ON CHASSIS AND ENGINE
Glass fiber yarn filling of main silencer
13.89
The main silencer is filled with glass fiber yarn.
Over a period, the fibers of the insulating material vanish into the air, and the silencer "burns out".
Not only is the noise level higher, the performance characteristic changes.
Removing main silencer
13.90
Warning
Danger of burns The exhaust system gets very hot when the vehicle is driven.
–
Allow the exhaust system to cool down. Do not touch hot components.
Installing the main silencer
13.91
Removing the air filter box lid
13.92
Installing the air filter box lid
13.93
–
Disconnect spring
–
Remove screws
600681-11
–
Mount the main silencer. Mount and tighten screws
Guideline
Remaining screws, chassis
–
Reconnect spring
600681-10
–
Pull off the air filter box lid in area
600682-10
–
Insert the air filter box lid into the rear area
600682-11
.
and take off main silencer.
M6
.
to the side and remove to the front.
.
10 Nm (7.4 lbf ft)
and clip it into the front area
81
.