Camera Link Video Timing - Dalsa Stop Action 4M30 User Manual

4M Stop Action Camera Manual
Power
Power will not be provided on the Camera Link connector. The camera will receive
power through a separate cable. Camera manufacturers will define their own power
connector, current, and voltage re

Camera Link Video Timing

Figure 22: Pantera SA 4M60 Standard Timing (Input and Output Relationships)
IMPORTANT:
This camera uses the
falling
edge of EXSYNC
to trigger line readout,
unlike previous DALSA
cameras, which used the
rising edge.
FRAME VALID
LINE VALID
PIXEL RESET
twSYNC The minimum width of th
pu lse. When in SMART EXSYNC
mode, the minimum widt
allow for the pho
reset.
twSYNC_INT Is the the integration time when the
"SMART EXSYNC" feature is available
and turned on. Note that the
time is necessary to guarantee proper
operation.
t FRAME The minimum frame time made up of
PERIOD tTransfer, tREADOUT plus
tOVERHEAD
tTRANSFER The time from the reception of the
falling edge of EXSYNC to the rising
edge of FVAL.
tREADOUT Is the time that frame valid is high
DALSA
PRELIMINARY
STROBE
twSYNC twSYNC
EXSYNC
tTRANSFER
DATA
thPR
twPR_LOW twPR_LOW
DVAL
e EXSYNC
h i s gre
tosites to be properly
min
quirements.
tFRAME PERIOD tFRAME PERIOD
tREADOUT tREADOUT
tFL tLINE tLINE
1
µs 12
ater to
µs 10
imu m
ms 16.129
µs
µs
57
twSYNC_INT twSYNC_INT
tLF
tLVAL_LOW tLVAL_LOW
N
tPR_INT
1000.0
58 ( clm 15 / 16 )
82 ( clm 2 / 3 )
16000 ( clm 15 / 16 ,
sot 320)
32000 ( clm 2 / 3 )
03-32-10121-09
tOVERHE