Saving, Loading And Resetting Coefficients - Dalsa Stop Action 4M30 User Manual

4M Stop Action Camera Manual
Calibrating Individual Pixels
Purpose:
Syntax
Syntax Elemen
Notes:
Example:

3.6.6 Saving, Loading and Resetting Coefficients

Saving the Curren
Purpose:
Sy
Notes:
Example:
Saving the Curren
Pu
Syntax:
Notes:
Example:
DALSA
PRELIMINARY
S ets an individual pixel's PRNU coefficient.
spc x y i
ts:
x
The pixel column number from 1 to 2352.
y
The pixel row number from 1 to
i
Coefficient value in a range from 0 to 12287
PRNU coeff = 1 + (
The spc command is not available when
the factory calibrated coefficients (
u
calibration. An error message is returned if you attempt to
perform PRNU calibration when usin
current
spc 10 50 500
t PRNU Coefficients
Saves the current PRNU coefficients to non-v
ntax:
wpc
The wpc command is not available when the camera is using the
factory calibrated coefficients (csn 0). You must select the user
coefficient set (csn 1) before you c
calibration. An error message is returned if you attempt to
perform PRNU calibration when using csn 0
current csn number, send the command ge
wpc
t FPN Coefficients
rpose: Saves the current FPN coefficients to non-volatile memory.
wfc
The wfc command is not available when the camera is using the
factory calibrated coefficients (csn 0). Yo
coefficient set (csn 1) before you can save FPN coefficients. An
error message is returned if you attempt to save FPN coefficients
when using csn 0. To return the current csn number, send the
command get csn.
wfc
i
)
4096
ser coefficient set (csn 1) before you can perform PRNU
number, send the command
csn
1728.
where
the camera is using
csn 0). You must select the
g csn 0. To return the
get csn.
olatile memory.
an perform PRNU
. To return the
t csn.
u m ust select the user
03-32-10121-09
37