Setting The Frame Rate - Dalsa Stop Action 4M30 User Manual

26
Mode 7: Internal Frame Rate, Maximum Exposur
In this mode, the fram
exposure control disabled (ECD).
Figure 14: Programmable Frame Rate with Maximum Exposure Time

3.4.2 Setting the Frame Rate

Purpose:
Syntax:
Syntax Elements:
Notes:
Related Commands:
Example:
03-32-10121-09
PRELIMINARY
e rate is set internally with a maximum exposure time with
Exposure Time
Readout
Frame Period
Programmable Period
Sets the camera's frame rate in Hz.
ssf f
f
Set the frame rate in Hz in a range from
frame, 80 MHz pixel ra
pixel rate). Rang
•
Camera must be operating in expos
•
Allowable range is dependent on the curr
mode and window size. Refer to section for more information
on Camera Link modes. Refer to section 3
Window of Interest for more in
size.
•
Changing the frame rate will automatically adjust the
exposure time if necessary. The camera sends a warning when
this occurs.
•
Refer to section 3.3.3 Setting the Camera's Pixel Rate for more
information on how to set the camera's pixel rate
sem, set
ssf 25.0
4M Stop Action Camera Manual
e Time
Readout
Programmable Period
1-
te) or - (4M30 full frame, 80 MHz
1 31
e increases when using a window of interest.
ure mode 2 or 7.
ent Camera Link
.5 Setting a Vertical
formation on setting a window
Exposure Time
Frame Period
62.1 (4M60 full
DALSA