Dalsa Stop Action 4M30 User Manual page 62

62
window start end
window set
sequence
window trigger
source
write user settings
03-32-10121-09
PRELIMINARY
wse i i x1 y1
x2 y2
wss i
wts m
wus
4M Stop Action Camera Manual
Sets the wind ow start and stop pixels
where:
i is the window se quence id. It is
alway s 0 in this camera.
i is the number of windows to set. It is
always 1 in this cam era.
x1 is window start corner value. Since
there is only vert ical window of interest
in this cam era, this value is always set
to 1 .
y1 is window start pixel number in a
range from 1 - 1725 and must belong to
following set: 1, 5, 9, ...1725
x2 is window e nd corner value. Since
there is only vertic al window of interest
in this came ra , this value is always set
to 2352 .
is window end pixel number in
y2
range from 2 - 1728 and must belo
the following s et: 4, 8, 12, ...1728
Toggles the current window sequence
when sw itching between wss 0 and
wss 1 or vice versa.
Defines the source for the window
sequence. Available values are:
1: Software command wss
2: Camera Link input (CC4)
Write all of the user settings to non-
volatile memory.
ng to
DALSA