Dalsa Stop Action 4M30 User Manual page 41

4M Stop Action Camera Manual
Setting D
Purpose:
Syntax:
Syntax Elements:
Notes:
Related Commands:
Example:
DALSA
PRELIMINARY
igital System Gain
Improves signal output swing after a backgrou
subtracting a digital va
command, the output can no longer reach its maximum. Use
ssb
this command to correc for this where:
ssg value =
max output value - ssb value
ssg t i
t
Sensor tap selection. Allowable range is
taps.
i
Gain setting. The gain ranges are 0
video values are multiplied by this value where:
D igital G ain=
For example, to set a digital gain of 1.0, i equals 4096.
•
Entering a large value gain will cause the camera to digitally
saturate the output image
•
Entering a zero value gain will cause the camera to force the
pixels in the designated tap to be 0 DN
ssb
ssg 1 15
lue from the digital video signal, using the
t
max output value
to 65535. The digital
i
4096
41
nd subtract. When
1 to 2, or 0 for all
03-32-10121-09