Revision History - Dalsa Stop Action 4M30 User Manual

4M Stop Action Camera Manual

Revision History

00
01
02
03
04
05
06
07
08
09
DALSA
PRELIMINARY
Prelim inary release
.Added the sce and eec commands to Table 16: All Available Commands.
Updated the set command description from allowable steps of 1µs to
allowable steps of 18.475 and 37.0µs in 3.4.3 S
Table 16: All Available Commands.
In section 3.6.1, updated Mode 2 timing diagram to show that readout and
exposure time can overlap.
Added the windowing commands, wss , wts , and wse to section 3.5 Setting a
Vertical Window of Interest and Table 16: All Available Commands.
Added the ssg , and ssb commands to section and Table 16: All Available
Commands.
Updated Figure 20: Camera Mechanical Dimensions
On page 6 changed the 'Camera Size' from 94x94x46 to 94x94x48 and the 'Mass'
from <500 to <550.
Updated mechanical drawing to show tooling holes on the front cover.
Updated dynamic range, responsivity, operating temp (to 50° from 40°,
measured at front plate)
Updated responsivity, dynamic range. Added get command. Added Max
Frame Rate vs Sequence Size graph. Removed GSS command. Removed SCG
and SFG commands. Added SVM 5 pattern.
Added test patterns 6 to 8.
Added flat field correction commands.
Added sot command to section 3.3.3 Setting the Camera's Pixel Rate.
Added section 3.1 First Power Up Camera Settings.
Appendix C
etting the Exposure Time a
63
nd in
03-32-10121-09