Selecting Factory Or User Coefficients; Enabling Pixel Coefficients - Dalsa Stop Action 4M30 User Manual

4M Stop Action Camera Manual

3.6.1 Selecting Factory or User Coefficients

Purpose:
Syntax:
Syntax Element
Notes:
Ex

3.6.2 Enabling Pixel Coefficients

Purpose:
Syntax:
Syntax Ele ent
Notes:
Example:
DALSA
PRELIMINARY
Selects the coeff
calibrated set of FPN and PRNU coefficients. The factory coefficients
cannot be erased or modified.
csn i
s:
i
Coefficient set to use.
0 = Factory calibrated s
coefficients cannot be erased or modified
1 = User calibrated set of FPN and PRNU c
coefficients can be deleted or modified.
The camera ships with the factory calibrated FPN and PRNU
coefficients
the camera
ample:
csn 0
The came
you can enable and
necessary.
epc i i
m s:
i
FPN coefficients
0 = FPN coefficients disabled
1 = FPN coefficients enabled
i
PRNU coefficients.
0 = PRNU coefficients disabled
1 = PRNU coefficients enabled
The coefficient set that you are enabling or disabling is
determined by the csn value. Refer to the previous section for
an explanation of the csn command.
epc 0 1
icient set to use. The camera ships with a factory
et of FPN and PRNU coefficients. These
saved to both set 0 and set 1. When you first boot up
, the camera operates using set 1 (csn 1) enabled.
ra ships with the FPN and PRNU coefficients enabled, but
disable FPN and PRNU coefficients whenever
.
33
.
oefficients. These
03-32-10121-09