Returning Pixel Coefficient Information - Dalsa Stop Action 4M30 User Manual

38
Loading Pixel Coefficients
Pu
Syntax:
Notes:
Example:
Re setting the C
Purpose:
Syntax:
Notes:

3.6.7 Returning Pixel Coefficient Information

Returning FPN
Pu
Syntax:
Syntax Elemen
Example:
03-32-10121-09
PRELIMINARY
rpose: Loads the last saved u
from non-volatile memory.
lpc
The coefficient set that you are loading is d
value. Refer to the section, Selecting
an explanation of the csn command. To return the current csn
number, send the command get csn.
lpc
urrent Pixel Coefficients
Resets the current user coefficients to zero. This
saved coefficients to zero.
rpc
and PRNU Coefficients
rpose: Returns
FPN, PRNU... for the rang
The camera also returns the pixel number with every fifth coefficient.
WARNING: Do not display all pixel coef
the number of pixels small (a sample size of 10 x 10 pixel is
recommended) to avoid waiting too long for the camera to return
information.
dpc x1 y1 x2 y2
ts:
x1
Start column pixel to display in a range from 1 to 2352.
y1
Start
x2
End column pixel to display in a range from 1 to 2352.
y2
End row pixel to display in a range from 1 to 1728.
dpc 10 30 20 40
ser coefficients or original factory coefficients
The rpc command is not availab
factory calibrated coefficients (csn 0). You must select the user
coefficient set (csn 1) befor
error message is returned if
coefficients when using csn 0. To return the current csn
number, send the command get csn.
all the current pixel coefficients in the order FPN, PRNU,
e specified by the x and y coordinates.
row pixel to display in a range from 1 to 1728.
4M Stop Action Camera Manual
etermined by the csn
Factory or User Settings, for
command also resets
le w hen the camera is using the
e you can reset pixel coefficients. An
you attempt to reset pixel
ficients at one time. Keep
DALSA