Saving And Restoring Settings; Saving And Restoring Factory And User Settings - Dalsa Piranha HN HN-80-08k40-R User Manual

46 Piranha HN RoHS User Manual

Saving and Restoring Settings

Saving and Restoring Factory and User Settings

Figure 19: Saving and Restoring Overview
Factory Settings
You can restore the original factory settings, including the factory calibrated pixel coefficient set, at any
time using the command .
rfs
User Settings
There are two main sets of user settings: Area Mode user settings and TDI Mode user settings. After
issuing the user settings save command, , settings are saved depending on which mode the camera is
wus
operating in when the command is issued. Also, when operating in TDI Mode, analog gain and offset,
digital gain and offset, and background subtract values are saved as distinct values for Forward and
Reverse directions. In other words, you can program the camera to operate with an analog gain value of
+5db in Forward direction and an analog gain value of +3db in Reverse direction. Forward and Reverse
direction settings are saved simultaneously with the command.
wus
Note
: When you switch directions, the settings saved for that direction are automatically loaded.
03-032-20135-00 Teledyne DALSA