Page 1
User Manual ITM-5112 Series 12" Industrial LED Touch Monitor...
Page 2
No part of this manual may be reproduced, copied, translated or transmitted in any form or by any means without the prior written permission of Advantech Co., Ltd. Information provided in this manual is intended to be accurate and reliable. How- ever, Advantech Co., Ltd.
This product has passed the CE test for environmental specifications when shielded cables are used for external wiring. We recommend the use of shielded cables. This kind of cable is available from Advantech. Please contact your local supplier for ordering information.
Page 4
Warnings, Cautions and Notes Warning! Warnings indicate conditions, which if not observed, can cause personal injury! Caution! Cautions are included to help you avoid damaging hardware or losing data. e.g. There is a danger of a new battery exploding if it is incorrectly installed. Do not attempt to recharge, force open, or heat the battery.
The sound pressure level at the operator's position according to IEC 704-1:1982 is no more than 70 dB (A). DISCLAIMER: This set of instructions is given according to IEC 704-1. Advantech disclaims all responsibility for the accuracy of any statements contained herein.
Introduction The Advantech ITM-5112 is a brand new Industrial Touch Monitor, designed to meet the needs of customers who want quick and easy integrations with Advantech Embedded Box Computers like ARK, and DSA. Advantech offers four different ITM- 5112 models to meet customer demands: ITM-5112R-M (standalone monitor), ITM-...
Product Photos Front view Rear view (ITM-5112R-M series & ITM-5112R-L series) Rear view (ITM-5112R-C series) ITM-5112 User Manual...
Page 12
Rear view (ITM-5112R-P series) ITM-5112R M series top view Power LED UP/Auto Power Ent. Down Menu ITM-5112R M series bottom view DVI-D Power button DC-12V ITM-5112R L series top view ITM-5112 User Manual...
Page 13
ITM-5112R L series bottom view DOWN PANEL SYSTEM POWER BUTTON IPANEL LINK UP POWER S.W. S.W. FOR MB ITM-5112R C series left/right view STORAGE LED POWER LED USB 1 USB 4 USB 2 LAN 1 USB 3 LAN 2 COM 1 AUDIO OUT POWER SWITCH DC 12~24V...
Specifications Note! The ITM-5112 series offers the following features and meets precise specifications. Unless otherwise noted, all the information listed below is subject to change without prior notification. Size 12“LED backlight panel Resolution 800 x 600 (SVGA) Viewing Angle 80°/80°/80°/60°...
Panel Mount Assembly SOP Use the 16 screws included in accessory box to attach panel mount brackets to ITM-5112. If the ITM-5112 you received has brackets already, check if brackets are well fixed. Then attach the 8 panel mount clamps, which are also included in the accessory box, to the ITM-5112 brackets.
Cable Clamp A cable clamp fixes the power cord to the case, preventing accidental disconnects. Accessory Packing List Panel-Mount clamp x 8 Screw for panel-mount clamp M4_30L x 8 Cable clamp x 1 Manual/Utility CD VGA cable 15P(M) 1.8 meter x 1* ...
OSD Functions (ITM-5112R-M Series Only) An 800 x 600 resolution OSD display was selected to illustrate examples below: Buttons Description Power Turns the monitor power ON or OFF. Activates the OSD menu. Menu/Exit Exits menu Automatically adjust the clock, phase, H-position and V-position. Auto/Left/Up Move the selector to the next option.
At the same time, press “Right” & “Left” keys to unlock the key. Touch Drivers The T/S driver CD-ROM is in the accessory box and comes with the product, and is also available online at the Advantech website as follows: http://www.advantech.com.cn/products/ITM-5112/mod_5ABE2947-4D54-4750- 9B04-9B64D334B4CC.aspx...
If experiencing trouble with the monitor, or if it fails to operate correctly, please refer to the following instructions before calling the Advantech service center. If unable to correct the faults using the instructions below, then please contact the distributor or the services/repair center.