2.1 Introduction
This chapter describes basic features and procedures for using the
Open-frame LCD monitor. Topics covered include the system installation,
OSD control, Touchscreen, and so on.
2.2 Preparing for First-time Use
Before you start to set up the ES-3115 LCD Monitor, You should have at
least the following items ready in your accessory box:
• 12V DC Power adapter
• 2-wire Power cord for adapter
• 1.8m VGA cable
• 1.8m RS-232 cable (Not available for ES-3115G)
• CD for ES-3115R/C/S/V driver and User's Menu
2.3 I/O arrangement
The diagram shows the VGA port, RS-232 port and DC Power inlet.
PWR.
Figure 2-1: Rear view of the ES-3115R/C/S/V
COM
MENU
DOWN
UP
AUTO TUNE
PWR. LED
DVI
VGA
DC-IN