Led Indicators - Moxa Technologies EtherDevice User Manual

LED Indicators

The front panel of MOXA EtherDevice Server contains several LED indicators. The
function of each LED is described in the table below.
LED
P1
P2
Fault
10/LNK/ACT
100/LNK/ACT GREEN
LNK/ACT
Color State
On
AMBER
Off
On
AMBER
Off
On
RED
Off
On
GREEN
Blinking
Off
On
Blinking
Off
On
AMBER
Blinking
Off
MOXA EtherDevice Server User's Manual 4-3
Hardware Overview
Description
Power is being supplied to power
input P1
Power is not being supplied to power
input P1
Power is being supplied to power
input P2
Power is not being supplied to power
input P2
MOXA EtherDevice Server's self-test
failed or power to one of the power
inputs is cut off.
MOXA EtherDevice Server's self-test was
successful
10 Mbps link has been established
Data is being transmitted at 10 Mbps
Port's 10 Mbps link is inactive
100 Mbps link has been established
Data is being transmitted at 100 Mbps
Port's 100 Mbps link is inactive
100BaseFX port is active
Data is being transmitted at 100 Mbps
100BaseFX port is inactive