Moxa Technologies EtherDevice User Manual page 31

RS-232 Connection
MOXA EtherDevice Server has one RS-232 (10-pin RJ45) console port, located on the top
panel. Use either an RJ45-to-DB9 or RJ45-to-DB25 cable (see the cable wiring diagrams
below) to connect MOXA EtherDevice Server's console port to your PC's COM port. You
may then use a console terminal program, such as MOXA PComm Terminal Emulator, to
access MOXA EtherDevice Server's console configuration utility.
RJ45 (10-pin) Console Port Pinouts
RJ45 (10-pin) to DB9 (F) Cable Wiring
Wiring MOXA EtherDevice Server
MOXA EtherDevice Server User's Manual 3-7