Moxa Technologies EtherDevice User Manual page 70

Link-on
Link-off
Traffic-Overload
Traffic-Threshold (%)
Traffic-Duration (secs)
NOTE The Traffic-Overload, Traffic-Threshold (%), and Traffic-Duration (secs) Port Event
items are related. If you Enable the Traffic-Overload event, then be sure to enter a nonzero
Traffic-Threshold percentage, as well as a Traffic-Duration between 1 and 300 seconds.
Test Email
After configuring and activating your MOXA EtherDevice Server's Event Types and Email
Setup, you can use the Test Email function to see if your e-mail addresses and mail server
address have been properly configured.
Console Test
Test your email
setup from the
Console utility's
Auto warning Test
menu.
6-20 MOXA EtherDevice Server User's Manual
Port Event Warning e-mail is sent when...
The port is connected to another device.
The port is disconnected (e.g., the cable is pulled
out, or the opposing device shuts down).
The port's traffic surpasses the Traffic-Threshold for
that port (provided this item is Enabled).
Enter a nonzero number if the port's
Traffic-Overload item is Enabled.
A Traffic-Overload warning is sent every
Traffic-Duration seconds if the average
Traffic-Threshold is surpassed during that time
period.